metal film resistors, pulse withstanding protective fp..p vishay dale www.vishay.com for technical questions , contact: ff2aresistors@vishay.com document number: 31030 104 revision: 23-jul-07 features ? special vishay dale design provides lightning withstand characteristics along with resistor functionality ? a thicker tin oxide power film system provides lightning surge absorption capabilities ? higher turns ratio and glass substrate provide sharper fusing characteristic than the standard flameproof product line ? protect against a variety of electrical hazards which can change or destroy sensitive electronic equipment including high energy voltage surges caused by power line anomalies (direct power crosses or inductively coupled effects) and other momentary overvoltages ? lead (pb)-free version is rohs compliant notes: ? pulse withstanding capabilities are value dependent. ? value above the cutoff value, shown above, will meet all the surge test requirements shown on next page. note: (1) some packaging codes are model specific. * pb containing terminations are not rohs compliant, exemptions may apply a v aila b le p b -free rohs* compliant e3 standard electrical specifications global model historical model power rating p 70 c w resistance range standard tolerance % cutoff value fp1/2p fp1/2p 0.5 10r - 1m 1, 2, 5 2k00 fp001p fp1p 1 10r - 1m 1, 2, 5 1k00 fp002p fp2p 2 9r - 1m5 1, 2, 5 300r fp003p fp3p 3 9r - 1m 1, 2, 5 250r fp069p fp69p 2 2r6 - 1m 1, 2, 5 400r marking - dale - value - tolerance - style and case size - date code (year/week) global part number information new g lobal part numberin g : fp002p1k00f9256b8 (preferred part numberin g format) fp0 02 p1k0 0f 9 2 5 6b8 historical part number: fp2p 1k00 1 % b8 (will continue to be accepted) fp2p 1k00 1 % b8 historical model resista n ce v alue tolera n ce code packagi n g global model resista n ce v alue tolera n ce code spec codes packagi n g (1) (see standard electrical specifications ta b le) r = decimal k = tho u sand m = million 10r0 = 10 1k30 = 1.3 k 1m00 = 1.0 m f = 1 % g = 2 % j = 5 % 5555 = fp1/2p 6206 = fp001p 9256 = fp002p 9303 = fp003p 7532 = fp069p ek = lead (p b )-free, b u lk ea = lead (p b )-free, t/r b8 = tin/lead, b u lk ch = tin/lead, t/r (750 pieces) cj = tin/lead, t/r (1000 pieces)
fp..p metal film resistors, pu lse withstanding protective vishay dale document number: 31030 for technical questi ons, contact: ff2ares istors@vishay.com www.vishay.com revision: 23-jul-07 105 dimensions in inches [millimeters] a 1.500 0.125 [38.10 3.18] d b global model dimensions in inches [millimeters] ab d fp1/2p 0.360 0.020 [9.14 0.51] 0.138 + 0.012 - 0.023 [3.51 + 0.31 - 0.58] 0.032 0.002 [0.81 0.05] fp001p 0.560 0.031 [14.22 0.79] 0.190 + 0.007 - 0.015 [4.83 + 0.18 - 0.38] 0.032 0.002 [0.81 0.05] fp002p 0.687 0.031 [17.45 0.79] 0.300 0.020 [7.62 0.51] 0.032 0.002 [0.81 0.05] fp003p 0.900 0.055 [22.86 1.40] 0.300 0.020 [7.62 0.51] 0.032 0.002 [0.81 0.05] fp069p 0.516 0.021 [13.11 0.53] 0.225 0.012 [5.72 0.31] 0.032 0.002 [0.81 0.05] 120 100 80 60 40 20 0 0 50 100 150 200 250 300 derating fp1/2p fp001p, fp002p, fp003p % of rated power ambient temperature c 120 100 80 60 40 20 0 0 50 100 150 200 250 300 derating 3 w 2 w fp069p 0.6 w + 70 c + 25 c ambient temperature c % of rated power
fp..p vishay dale metal film resistors, pu lse withstanding protective www.vishay.com for technical questions , contact: ff2aresistors@vishay.com document number: 31030 106 revision: 23-jul-07 lightning pulse wave forms lightning pulse wave forms are defined by three numbers: ? maximum time to reach peak voltage level (typically 10 s). ? minimum time for voltage to decrease to half value. ? the peak voltage level. three examples are shown below. 10 by 560 to 800 v fcc - metallic sur g e 10 by 1000 to 1000 v rea - current sur g e 10 by 160 to 1500 v fcc - lon g itudinal sur g e volts s 0 400 800 1200 1600 200 600 1000 volts volts s 0 400 800 1200 1600 200 600 1000 s 0 400 800 1200 1600 200 600 1000
fp..p metal film resistors, pu lse withstanding protective vishay dale document number: 31030 for technical questi ons, contact: ff2ares istors@vishay.com www.vishay.com revision: 23-jul-07 107 these graphs show the relationship value and pulse wit hstanding voltage for fp1/2p thru fp003p using a 1.0 % resistance shift after 10 pulses as the figure of merit. the stable operating regi on of each package is on the right side of the appropriate lin e. fp069p fp002p fp003p fp001p fp1/2p (1500 at 2 k ) 10 x 160 s volts 1750 1500 1250 1000 750 500 250 0 100 300 fp003p fp002p fp069p fp001p fp1/2p resistance ( ) fp002p fp069p fp001p fp1/2p volts volts resistance ( ) resistance ( ) 500 700 900 100 300 500 700 900 1750 1500 1250 1000 750 500 250 0 10 x 560 s 10 x 1000 s 100 300 500 700 900 1750 1500 1250 1000 750 500 250 0 fp003p
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
